Grade: 5-7
Time: roughly 50 minutes

Goals:

 

Vocabulary:

Materials per team (2-3)

Lesson Plan:

Introduction (3-5 minutes)

  1. The United States and its territories encompasses 169 geologically active volcanoes that are monitored by the United States Geological Survey (USGS). In order to prevent loss of life and property, the USGS issues volcano warnings which requires real-time monitoring of volcanoes, their seismology, and gas, thermal, and surface deformation measurements.
  2. What challenges do scientists have to overcome in order to monitor volcanoes? What tools do you think scientists use in order to overcome these challenges? (Reference on Volcano Monitoring: http://volcanoes.usgs.gov/about/faq/faqmonitoring.php)
  3. Imagine if you had to deposit a small piece of equipment to the center of a lava flow. How would you do it? What science concepts would you use to help you achieve your mission?

Starting Challenge (25 minutes)

  1. Introduce the Challenge: Devise a way to deposit a ping-pong ball into a paper cup that is located in the middle of a 6-foot diameter circle.
  2. Introduce the Constraints:  Every person in the team must be actively involved in the placement of the ball. The ping pong ball must start outside the circle and must come to rest inside the paper cup in the center of the circle. Students may not touch the ping pong ball or reach into the 6-foot circle. No part of anyone’s body may extend into the imaginary cylinder that extends above the circle. Only the provided materials may be used.  
  3. Build: Give students about 15 minutes to build and test. The instructor should ask open-ended questions to help guide students through the design process, but should also allow students space to tinker.
  4. Testing: During the build time students should be able to test and iterate their designs freely. Students should build their device away from the testing site, and then bring their device over to the testing site in order to test. Teams may not build/iterate in at the test site! The setup for the test site is as follows:

Demonstrating and Reflecting (20 minutes)

  1. Demonstrating: Have students demonstrate their devices one team at a time. If students have not completed their device, or their device did not function as expected, ask them how the device would have worked.  
  2. Reflecting: Have each group of students explain their design strategy and how their device uses energy and force to place the ball in the cup. The instructor should ask leading questions to get at the science behind the designs.