Essential Site Maintenance: Authorea-powered sites will be updated circa 15:00-17:00 Eastern on Tuesday 5 November.
There should be no interruption to normal services, but please contact us at [email protected] in case you face any issues.

loading page

High-Resolution Beam Switch AntennaBased on Modified CRLH Butler Matrix
  • +1
  • reza Karimian,
  • Mansoor Dashti Ardakani,
  • Shahrokh Ahmadi,
  • Mona Zaghloul
reza Karimian
George Washington University

Corresponding Author:[email protected]

Author Profile
Mansoor Dashti Ardakani
Institut national de la recherche scientifique
Author Profile
Shahrokh Ahmadi
Author Profile
Mona Zaghloul
Author Profile

Abstract

A Novel beam switch antenna based on a CRLH Butler matrix is presented in this manuscript. The CRLH transmission line is proposed to increase the number of beams switch. The proposed CRLH TL has more than 100- degree phase deference with different bias voltages. By different bias voltages between 0 to 8 Volt, different combinations of phase shifts are achieved. The CRLH transmission line is added to the conventional butler matrix to increase the number of phase incremental combination and consequently the beam pattern. A 5-degree beam resolution is achieved. The measurement results follow well with the simulation result.
01 Feb 2020Submitted to Engineering Reports
07 Feb 2020Submission Checks Completed
07 Feb 2020Assigned to Editor
21 Feb 2020Reviewer(s) Assigned
18 May 2020Editorial Decision: Reject & Resub
20 Jul 20201st Revision Received
21 Jul 2020Submission Checks Completed
21 Jul 2020Assigned to Editor
24 Jul 2020Reviewer(s) Assigned
25 Aug 2020Editorial Decision: Revise Minor
28 Aug 20202nd Revision Received
28 Aug 2020Submission Checks Completed
28 Aug 2020Assigned to Editor
28 Aug 2020Editorial Decision: Accept
14 Oct 2020Published in Engineering Reports. 10.1002/eng2.12287