loading page

Evaluation of damage in composites by using Thermoelastic Stress Analysis: a promising technique to assess the stiffness degradation
  • Rosa De Finis,
  • Davide Palumbo,
  • Umberto Galietti
Rosa De Finis
Polytechnic Institute of Bari, Politecnico di Bari

Corresponding Author:[email protected]

Author Profile
Davide Palumbo
Politecnico di Bari
Author Profile
Umberto Galietti
Politecnico di Bari
Author Profile

Abstract

The stiffness degradation represents one of the most interesting phenomena used for describing the fatigue behaviour of composites. In this regard, in literature, several works have been presented for modelling the fatigue life by studying the stiffness degradation. A critical aspect of modelling damage fatigue is represented by the difficulties in simulating the whole behaviour of material and then in describing the damage progression in all its stages. In addition, the validation of models requires the measurement of stiffness variations by means of experimental techniques. Above all for real components, the difficulties in defying proper models are accompanied by the difficulties in measuring stiffness degradation due to inapplicability of classic experimental techniques. In this work, the stiffness degradation of quasi-isotropic carbon-fibre-reinforced-polymer obtained by automated fiber placement, has been assessed by means of Thermoelastic Stress Analysis. The amplitude of temperature signal at the mechanical frequency (thermoelastic signal) was considered as an indicator of material degradation and compared to the data provided by an extensometer. The correlation between thermoelastic and mechanical data allowed to build a new experimental model for evaluating and predicting material stiffness degradation by just using thermoelastic data. The proposed approach seems to be very promising for stiffness degradation assessment of real and complex mechanical components subjected to actual loading conditions.
23 Mar 2020Submitted to Fatigue & Fracture of Engineering Materials & Structures
24 Mar 2020Submission Checks Completed
24 Mar 2020Assigned to Editor
25 Mar 2020Reviewer(s) Assigned
16 Apr 2020Review(s) Completed, Editorial Evaluation Pending
04 May 2020Editorial Decision: Revise Major
26 May 20201st Revision Received
27 May 2020Submission Checks Completed
27 May 2020Assigned to Editor
27 May 2020Reviewer(s) Assigned
01 Jun 2020Review(s) Completed, Editorial Evaluation Pending
02 Jun 2020Editorial Decision: Accept