In this study, effect of swirling addition on the liquid mixing behavior of multi-orifice-impinging transverse jet mixer has been investigated by planar laser induced fluorescence as well as large eddy simulation (LES). In the case of swirling addition into the jet flow, there exists an optimized swirling jet angle or optimized jet-to-cross velocity ratio for the fixed mixer configuration. A larger swirling jet angle will make the flow dominated by the swirling, resulting in a slower mixing process. Interaction of swirling crossflow with no-swirling injected streams, or with swirling injected streams in the opposite direction is beneficial for the mixing. LES predictions show that many small vortices are produced homogenously due to intensified impingement in the case of opposite swirling directions, leading to a relative fast mixing process in several milliseconds. Whereas the mixing is restrained when the swirling directions of two flows are the same.

We investigated the flow characteristics in a tank of H/T=1.5 stirred by a novel multi-blade combined agitator (MBC) by using time-resolved PIV and LES approach. The predictions were assessed by Y+ values and power spectrum analysis, as well as experimental validation of velocity distributions. Results demonstrate that the MBC agitator can load the energy into the system effectively with a power number of 12.5 in a turbulent regime, resulting in improved axial and radial mass exchange. The upper and lower short blades produce an axial down-flow in the top half and an axial up-flow in the bottom half, respectively. Part of axial flows change to radial flows by the radial pumping of the long blades, meanwhile, the impingement of two axial flows improves the axial mass exchange. These flow characteristics leads to an obvious improvement in the turbulent kinetic energy distribution uniformity.