loading page

CHARACTERIZATION AND APPLICATION OF PETROLEUM SULFONATE SYNTHESIZED BY GAS-PHASE SO3 SULFONATION IN ROTATING PACKED BED
  • +6
  • Xiaoke Ma,
  • Bin Liu,
  • Tianxiang Ma,
  • Hai-Kui Zou,
  • Guang-Wen Chu,
  • Baochang Sun,
  • Liang-Liang Zhang,
  • Yong Luo,
  • Jianfeng Chen
Xiaoke Ma
Beijing University of Chemical Technology

Corresponding Author:[email protected]

Author Profile
Bin Liu
Beijing University of Chemical Technology
Author Profile
Tianxiang Ma
Author Profile
Hai-Kui Zou
Beijing University of Chemical Technology
Author Profile
Guang-Wen Chu
Beijing University of Chemical Technology College of Chemical Engineering
Author Profile
Baochang Sun
Beijing Univ Chem Technol
Author Profile
Liang-Liang Zhang
Beijing University of Chemical Technology College of Chemical Engineering
Author Profile
Yong Luo
Beijing University of Chemical Technology
Author Profile
Jianfeng Chen
Beijing University of Chemical Technology
Author Profile

Abstract

In this study, PS was synthesized by gaseous SO3 sulfonation of distillate oil in a rotating packed bed. The chemical compositions of the prepared PS and its raw material (distillate oil) were obtained by the combined analysis of the double-bond equivalent and carbon number at the molecular level. In addition, the EOR performance of PS has been studied by measuring surface tension, interfacial tension (IFT), wettability alteration and core-flooding experiments. An ultra-low IFT value 1.327×10-3 mN/m between the crude oil and prepared PS solution was obtained at the critical micelle concentration (CMC) of PS solution. Core flooding experiments showed that additional oil recoveries of 28.10% and 30.77% were obtained at PS concentrations of 0.3% and 0.6% respectively after conventional water flooding, indicating the prepared PS has good performance on EOR.