Optimization of asymmetric bio-oxidation with resting cells for
preparation of (S)-omeprazole in the chloroform–water biphasic systems
using response surface methodology
Abstract
(S)-Omeprazole is a very effective anti-ulcer medicine, and it is a
significant challenge to prepare it by whole cells and to substantially
increase the substrate concentration. In the chloroform–water biphasic
system, resting cells of the mutant of Rhodococcus rhodochrous(R.
rhodochrous)ATCC 4276 were employed to catalyze the bio-oxidation of the
omeprazole sulfide for preparation of (S)-omeprazole. At a high
substrate concentration(180 mM) and cell concentration(100 g/L), the
bio-oxidation was optimized using response surface methodology(RSM), and
the optimal yield of (S)-omeprazole obtained was 92.9% with
enantiomeric excess(e.e.) (>99%), and no sulfone product
was detected under the optimal conditions: the reaction temperature was
37°C, pH of phosphate buffer, 7.3 and the reaction time, 43h
respectively. A quadratic polynomial model was established, which
predicts the experimental data with very high accuracy according to R2
of 0.9990. The chloroform–water biphasic system may mainly contribute
the significant improvement of substrate tolerance because almost all
substrates may partitioned in the organic phase (water solubility of
omeprazole sulfide is only about 0.5 mg/ml), resulting in little damage
and inhibition to cells by substrates. The mutant of R. rhodochrous ATCC
4276 exhibited a high enantioselective, activity and substrate and
product tolerance. The aerated flask provides enough oxygen for a high
concentration of cells. Accordingly, the bio-oxidation is thus more
promising for efficient preparation of chiral sulfoxides.