loading page

Anisotropic properties of additively manufactured lightweight concrete elements
  • +1
  • Marco Lindner,
  • Ralf Gliniorz,
  • Henrik Funke,
  • Sandra Gelbrich
Marco Lindner
no affiliation

Corresponding Author:[email protected]

Author Profile
Ralf Gliniorz
no affiliation
Author Profile
Henrik Funke
no affiliation
Author Profile
Sandra Gelbrich
no affiliation
Author Profile

Abstract

Robotic concrete extrusion is a novel additive manufacturing process (3D concrete printing) and is part of a continuously digitally controlled value chain. According to the state of the art, concrete is considered to be an isotropic material due to the manufacturing process. However, for the additive manufacturing process, the isotropic approach hast to be reconsidered due to the layered structure. It can be assumed that due to the layered structure, the material properties vary depending on the deposition direction and the geometry of the layers. The aim of the work was to record the material-technical characteristics of extruded elements manufactured according to standards in comparison with concrete recipes. Process-related influences on the mechanical parameters of additively manufactured concrete elements were examined and evaluated in more detail. Based on the findings obtained, the dimensioning, design and measurement of components can be carried out and thus guidelines for components can be derived. With these derived guidelines, the material utilization and economic efficiency can be improved.
17 Apr 2023Submitted to Applied Research
17 Apr 2023Submission Checks Completed
17 Apr 2023Assigned to Editor
17 Apr 2023Reviewer(s) Assigned
08 Jun 2023Review(s) Completed, Editorial Evaluation Pending
08 Jun 2023Editorial Decision: Revise Major
01 Aug 20231st Revision Received
01 Aug 2023Submission Checks Completed
01 Aug 2023Assigned to Editor
01 Aug 2023Reviewer(s) Assigned
25 Aug 2023Review(s) Completed, Editorial Evaluation Pending
26 Aug 2023Editorial Decision: Revise Major
29 Aug 20232nd Revision Received
01 Sep 2023Submission Checks Completed
01 Sep 2023Assigned to Editor
02 Sep 2023Reviewer(s) Assigned
24 Sep 2023Review(s) Completed, Editorial Evaluation Pending
24 Sep 2023Editorial Decision: Accept