Visible light communication is envisaged as a promising enabling technology for sixth generation (6G) and beyond networks. It was introduced as a key enabler for reliable massive-scale connectivity, mainly thanks to its simple and low-cost implementation which require minor variations to the existing indoor lighting systems. The key features of VLC allow offloading data traffic from the current congested radio frequency (RF) spectrum in order to achieve effective short-range, high speed, and green communications. However, several challenges prevent the realization of the full potentials of VLC, namely the limited modulation bandwidth of light emitting diodes, the interference resulted from ambient light, the effects of optical diffuse reflection, the non-linearity of devices, and the random receiver orientation. Meanwhile, centralized machine learning (ML) techniques have exhibited great potentials in handling different challenges in communication systems. Specifically, it has been recently shown that ML algorithms exhibit superior capabilities in handling complicated network tasks, such as channel equalization, estimation and modeling, resources allocation, opportunistic spectrum access control, non-linearity compensation, performance monitoring, detection, decoding/encoding, and network optimization. Nevertheless, concerns relating to privacy and communication overhead when sharing raw data of the involved clients with a server constitute major bottlenecks in large-scale implementation of centralized ML techniques. This has motivated the emergence of a new distributed ML paradigm, namely federated learning (FL). This method can reduce the cost associated with transferring the raw data, and preserve clients privacy by training ML model locally and collaboratively at the clients side. Thus, the integration of FL in VLC networks can provide ubiquitous and reliable implementation of VLC systems. Based on this, for the first time in the open literature, we provide an overview about VLC technology and FL. Then, we introduce FL and its integration in VLC networks and provide an overview on the main design aspects. Finally, we highlight some interesting future research directions of FL that are envisioned to boost the performance of VLC systems.

Spatial Modulation (SM) has been proposed as a multiple-input-multiple-output (MIMO)-based technique to overcome the inter-channel interference experienced in conventional MIMO systems. It has been further shown that SM enhances energy efficiency and reduces the receiver’s complexity. Nevertheless, under high antenna correlation scenarios, the detection performance of the antenna indices degrades significantly. To address this critical concern, in this paper, we propose three autoencoder-based frameworks for spatial modulation. The first scenario, similar to conventional spatial modulation, trains the encoder for data modulation and the decoder for data demodulation as well as antenna index detection. The performance of this framework deteriorates in high antenna correlation scenarios. Therefore, two novel solutions are presented to embed the antenna index into the transmitted signal in order to reduce the receiver’s reliance on the channel conditions. The first framework adds a  phase-shift keying-based antenna signature, while the other trains the encoder to learn an appropriate antenna index embedding. Simulation results show that the two enhanced frameworks result in a significantly enhanced performance, compared to conventional spatial modulation, in terms of block error rate and power efficiency under a high correlation setup (about 18 dB and 24 dB gain, respectively, at a Rician factor of 20 dB).

The sixth generation (6G) of wireless networks are envisioned to support a plethora of human-centric applications and offer connectivity to a massive number of devices with diverse requirements, thus enabling massive Machine Type Communications. Nevertheless, with the rapid growth of the number of connected devices as well as the ever-increasing network traffic, network energy consumption has become a major challenge. Additionally, 6G is expected to catalyze the emergence of new applications that are characterized by their harsh environmental conditions, with ultra-small and low-cost wireless devices. Therefore, there is a pressing need for developing sustainable solutions that take into consideration all these requirements in order to realize the full potential of 6G networks. Within this context, zero-energy devices (ZEDs) have emerged as a prominent solution for the next generation green communication architecture. Such devices eliminate the need for recharging plugins and replacing batteries by integrating disruptive technologies, such as radio frequency energy harvesting, backscatter communications, low power computing, and ultra-low power receivers. Motivated by this, this article provides an in-depth review of the existing literature on the newly emerging ZEDs for future networks. We further identify different relevant use cases and provide an extensive overview on the key enabling technologies and their requirements for realizing ZED-empowered networks. Finally, we discuss potential future research directions and challenges that are envisioned to enhance the performance and efficiency of ZED-based networks.

The wireless networks of the future are evolving to enable reliable communication for resource-constrained, miniaturized internet of things (IoT) devices, which will place stringent demands on future sixth-generation (6G) mobile networks. These demands include low cost, very low latency, improved spectrum, and power efficiency, higher reliability, and significantly improved data rates. Emphasizing that these devices have limited functionality and may be placed in inaccessible locations, replacing or recharging batteries can be a daunting task, so energy-efficient solutions should be developed to ensure uninterrupted, seamless wireless communication for the power-constrained IoT devices. In this paper, we consider the integration of long-range (LoRa) modulation into backscatter communications (BackCom), and we develop a mathematical framework in order to investigate the error rate performance of the considered system model. In particular, we derive novel exact and approximated closed-form expressions for the symbol error rate (SER), under the assumption of canceled radio-frequency (RF) interference. The obtained analytical results, corroborated by numerical results, confirm the advantages of integrating LoRa into BackCom system as a low-complex technique in order to extend the transmission distance in power-limited backscatter devices.

Federated learning (FL) has recently emerged as a novel technique for training shared machine learning models in a distributed fashion while preserving data privacy. However, the application of FL in wireless networks poses a unique challenge on the mobile users (MUs)’ battery lifetime. In this paper, we aim to apply reconfigurable intelligent surface (RIS)-aided wireless power transfer to facilitate sustainable FL-based wireless networks. Our objective is to minimize the total transmit power of participating MUs by jointly optimizing the transmission time, power control, and the RIS’s phase shifts. Numerical results demonstrate that the total transmit power is minimized while satisfying the requirements of both minimum harvested energy and transmission data rate.

UAVs can be used as aerial relays to provide communication services in remote uncovered areas or dense environments with occasional high capacity demands. However, due to the low power of Internet-of-Things (IoT) devices, UAV-based IoT applications, such as precision agriculture and environment monitoring, may experience high shadowing or equipment failure, which degrades the communications’ quality between IoT devices and their gateways. To tackle this issue, we consider the long range (LoRa) communication technology. Specifically, we investigate the performance of LoRA-enabled aerial communications, where a LoRa gateway communicates with a distant IoT device through the assistance of an amplify-and-forward aerial relay. Under the assumption of shadowed Rician fading channels, we characterize at first the end-to-end LoRa communication link. Then, we derive an exact symbol error rate expression for the underlying system model. Finally, numerical results are presented to corroborate the efficacy of our derived expressions and provide valuable insights into the error performance of LoRa-enabled aerial networks.

In this letter, we investigate the performance of reconfigurable intelligent surface (RIS)-assisted communications, under the assumption of generalized Gaussian noise (GGN), over Rayleigh fading channels. Specifically, we consider an RIS, equipped with N reflecting elements, and derive a novel closed-form expression for the symbol error rate (SER) of arbitrary modulation schemes. The usefulness of the derived new expression is that it can be used to capture the SER performance in the presence of special additive noise distributions such as Gamma, Laplacian, and Gaussian noise. These special cases are also considered and their associated asymptotic SER expressions are derived, and then employed to quantify the achievable diversity order of the system. The theoretical framework is corroborated by numerical results, which reveal that the shaping parameter of the GGN (alpha) has a negligible effect on the diversity order of RIS-assisted systems, particularly for large (alpha) values. Accordingly, the maximum achievable diversity order is determined by N.

Space-air-ground integrated network (SAGIN) has emerged as a paradigm shifting architecture that offers large-scale, flexible wireless coverage and seamless, high-rate connectivity to complement terrestrial communications. Nonetheless, unlocking the potentials of SAGIN is subject to addressing non-trivial challenges associated with their inherent time-variability, self-organization, and heterogeneity. Meanwhile, the concept of reconfigurable intelligent surfaces (RISs) is recognized as a disruptive technology that supports an unprecedented control of electromagnetic waves propagation and potentially offers significant enhancements in spectral efficiency, coverage expansion, and security, all achieved in a low-cost and energy-efficient manner. We anticipate that the integration of RISs into SAGIN will not only play a fundamental role in improving the quality of inter- and intra- layer communications, but will also provide complex interactions among the three network segments, and hence, opens the horizons for a new breed of applications across all industries. In this article, we explore the underlying opportunities and challenges of integrating RIS-enabled communications into SAGIN, and present a forward-looking overview of the cross-layer operational elements supported by RISs. Finally, we outline major enabling technologies and present a look ahead toward addressing open research issues.

Recent advances in programmable metasurfaces, also dubbed as reconfigurable intelligent surfaces (RISs), are envisioned to offer a paradigm shift from uncontrollable to fully tunable and customizable wireless propagation environments, enabling a plethora of new applications and technological trends. Therefore, in view of this cutting edge technological concept, we first review the architecture and electromagnetic waves manipulation functionalities of RISs. We then detail some of the recent advancements that have been made towards realizing these programmable functionalities in wireless communication applications. Furthermore, we elaborate on how machine learning (ML) can address various constraints introduced by real-time deployment of RISs, particularly in terms of latency, storage, energy efficiency, and computation. A review of the state-of-the-art research on the integration of ML with RISs is presented, highlighting their potentials as well as challenges. Finally, the paper concludes by offering a look ahead towards unexplored possibilities of ML mechanisms in the context of RISs.

In this paper, we analyze the performance of relay-assisted, single-stage (SS) non-orthogonal multiple access (NOMA) and dual-stage (DS) NOMA power line communication systems. Specifically, derive closed form expressions for the outage probabilities of the SS NOMA and DS NOMA schemes. Subsequently, we formulate optimization problems and obtain closed-form solutions for the optimal power allocation coefficients of the SS NOMA and DS NOMA scheme, such that the probability of overall outage is minimized. The accuracy of our analysis and the tightness of the approximations employed are validated through Monte Carlo simulations and numerical techniques. Moreover, we show that the DS NOMA scheme outperforms the SS NOMA scheme, in terms of the overall outage probability.

The increasing demand for wireless connectivity and the emergence of the notion of the Internet of Everything require new communication paradigms that will ultimately enable a plethora of new applications and new disruptive technologies. In this context, the present contribution investigates the use of the recently introduced intelligent reflecting surface (IRS) concept in unmanned aerial vehicles (UAV) enabled communications aiming to extend the network coverage and improve the communication reliability as well as spectral efficiency of Internet of Things (IoT) networks. In particular, we first derive tractable analytic expressions for the achievable symbol error rate (SER), ergodic capacity, and outage probability of the considered set up. Following this, we also derive tight upper and lower bounds on the average signal-to-noise ratio (SNR). Our derivations are then compared with the corresponding asymptotic performance, based on the central limit theorem (CLT) assumption, which reveals that the asymptotic SNR falls within the area between derived bounds, and approaches either bound depending on the number of reflective elements (REs). We further show that the asymptotic SER becomes in a tight agreement with the corresponding exact simulation SER for > 16. In addition, the offered results demonstrate that the use of the IRS is significantly effective as they assist in improving the achievable SER by five orders of magnitude. We further demonstrate that, in terms of achievable ergodic capacity, IRS-assisted UAV communication systems can exhibit ten times higher capacity compared to conventional UAV communications. Based on the above, these results and related insights are anticipated to be useful in the design and deployment of IRS-assisted UAV systems in the context of beyond 5G communications, such as 6G communications.