This paper presents an H-plane SIW horn antenna whose directivity is enhanced using holey unit cells along the horn flaring. By wisely drilling the horn antenna, it is possible to reduce the phase error in the aperture which is a common problem in horn antennas if the optimum dimensions are not employed. An analysis of the distribution of the unit cells along the horn antenna has been carried out to achieve the desired equivalent refractive indices. By changing the hole radius, different equivalent refractive indices can be tuned with a wideband performance. This fact enables the implementation of a collimation zone inside the horn antenna which transforms the pseudo-circular wavefront into a quasi-planar one in the radiating aperture. The produced directivity is similar to the horn antenna with the optimum dimensions but a longitudinal reduction of 53.7% and a higher realized gain are achieved. A holey SIW horn antenna is designed and manufactured. The measured results show an impedance bandwidth performance below -10 dB from 34.3 GHz to 44.5 GHz (25.9%) with a realized gain above 10 dBi. The gain difference regarding a SIW horn antenna without the collimation zone is about 2-3 dBi in the operating frequency range.

This paper presents a vertically stacked SIW antenna array that enables different array configurations with the minimum number of SIW layers. This achievement lies in the modular feature offered by the proposed design. Specifically, 4 distinct array configurations can be produced with only 3 different design of SIW layers. Depending on the number of SIW layers employed in the stacked antenna, the directivity in the E-plane is modified. To obtain an equal and in-phase power distribution among the array elements, H- and E-plane corporate feeding networks are efficiently implemented in each array configuration. Array configurations of 1, 2, 4 and 8 radiating layers are offered by the proposed modular array, where each radiating layer is formed by 8 H-plane horn antennas. The simulated directivity for the array configurations ranges from 15.8 dBi to 23.8 dBi and the main beam direction remains fixed along the operating frequency range. The array design has been manufactured and agreement between simulated and measured results are observed. The measured impedance bandwidth in all the array configurations is from 35 GHz to 41 GHz (15.79% bandwidth) with a reduction in the E-plane beamwidth as the number of radiating layers increases.