AUTHOREA
Log in Sign Up Browse Preprints

loading page

Design of Bandpass Filtering Power Amplifier Based on Coupled Microstrip Line Structure
  • +4
  • Baoquan Zhong,
  • Zhiqun Cheng,
  • Minshi Jia,
  • Bingxin Li,
  • Kun Wang,
  • Zhenghao Yang,
  • Zheming Zhu
Baoquan Zhong
Hangzhou Dianzi University Department of Electronic Information Engineering
Author Profile
Zhiqun Cheng
Hangzhou Dianzi University Department of Electronic Information Engineering
Author Profile
Minshi Jia
Hangzhou Dianzi University Department of Electronic Information Engineering

Corresponding Author:[email protected]

Author Profile
Bingxin Li
Hangzhou Dianzi University Department of Electronic Information Engineering
Author Profile
Kun Wang
Hangzhou Dianzi University Department of Electronic Information Engineering
Author Profile
Zhenghao Yang
Nanjing University of Information Science and Technology
Author Profile
Zheming Zhu
Hangzhou Dianzi University Department of Electronic Information Engineering
Author Profile

Abstract

This letter presents a broadband high-efficiency power amplifier (PA) based on a series of continuous modes (SCMs). A novel filtering matching network is proposed for realizing the output matching network (OMN) of the PA. The network consists of a branch-loaded cascade-coupled microstrip line structure (BLCCMLS) and a harmonic control network (HCN). The cascaded coupled microstrip line extends the bandwidth of the filter, and this filtering OMN has high bandpass selectivity and high out-of-band rejection, which improves the efficiency of the PA. For demonstration, a 10W GaN HEMT device is used to design and implement a PA. The measurement results indicate that the designed PA achieved an output power (Pout) of 38.7-42 dBm, a drain efficiency (DE) of 60.5%-74.1%, and a gain of 8.7-12 dB at 2.05-2.7 GHz.