Enzymatically modified cheeses (EMC) aim to achieve, in a shorter time frame, a composition and sensory characteristics akin to those of aged cheese. This study analyzed the lipid profile, composition, free fatty acid (FFA) content, and sensory attributes of EMC pastes with the objective of emulating the flavor profile of a red smear-ripened cheese (SR). Two different smear ripened cheeses were utilized as references: SR1, aged for 2–3 months, and SR2 aged for 10 months. Twelve formulations of EMC were prepared using a fatty medium moisture cheese corresponding to Mercosur’s Danbo type cheese (MD) as sole base, with the addition of the two types of SR cheeses and enzymes including exopeptidase, endopeptidase, and lipase, with varying concentrations of the latter. The EMC formulations exhibited a different physicochemical composition compared to the SR cheeses, with higher moisture, ash content, lower fat, and protein content. The highest total FFA contents were found in formulations with SR2, followed by formulations with SR1. As the concentration of lipase increased in the formulations, a greater degree of lipolysis was observed. Sensory profile was not influenced by the concentration of lipase, but rather depended on the type of cheese used as the base. All samples prepared with SR1 besides those prepared with SR2 as the base cheese and the highest concentration of lipase, exhibited sensory profiles more closely resembling that of lightly aged SR1. The enzymatic modification of cheeses proved to be a useful tool for generating sensory profiles similar to slightly aged SR cheese.

Guerbet alcohol (GA) is β-branched primary alcohol having excellent physiochemical properties like lower pour point (PP) and higher kinematic viscosity (KV) in comparison to linear alcohol. Although different aspects of the synthesis of GA, such as methods of synthesis, catalytic systems, and reaction conditions, have been studied, but statistical modeling and optimization of the synthesis of GA have not been carried out. In the present work, the optimization of the synthesis of GA using a mixture of lauryl and myristyl alcohol was carried out with the aid of response surface methodology (RSM) considering the conversion of the reaction, PP and KV at 40˚C & 100˚C as dependent variables. The optimal reaction conditions were temperature, pressure, and time of 220˚C, 300 mbar, and 10 hours respectively. The optimum conversion was 99.141%, including dimer yield of 81.755%, PP of -3˚C, KV at 40˚C & 100˚C of 34.12 cSt & 7.22 cSt, respectively. The results obtained by the RSM were then authenticated, applying artificial neural networks (ANN) generated with the help of MATLAB. The ability of the generated model to predict the response variables was validated by less than 5% error for almost all the models, confirming the statistical significance. Also, the tribological potential for linear Ginol-12,14 (FA) and synthesized branched GA as lubricant additive was evaluated by determining its physiochemical, thermal and tribological properties.

This study aimed to investigate the impact of seasonal climate change on safflower genotype productivity in Central Anatolian conditions during 2021 and 2022. The research focused on seed yield, oil content, and oil yield, considering variations in Growing Degree Days (GDD) at different growth stages. In both years, seed yield was significantly affected by rainfall deficiency. In 2021, safflower genotypes had an average seed yield of 1540 kg ha -1, while in 2022, it increased to 2390 kg ha -1 due to higher precipitation during critical growth stages. Different genotypes showed distinct performances in seed yield each year, highlighting the importance of selecting drought-tolerant genotypes for breeding programs. Oil content also exhibited significant variations between genotypes and years. Drought stress during flowering and seed filling periods generally led to a decrease in safflower oil content. However, in 2021, despite drought during the seedling stage, there was an increase in average oil content, potentially due to compensatory mechanisms related to reduced seed yield and dry matter content. Moreover, the study explored GDD values at different growth stages, revealing substantial variation among genotypes in GDD accumulation. Genotypes with higher GDD accumulation typically displayed higher seed and oil yields, indicating their better stress tolerance. Conversely, early maturing genotypes with lower GDD values were better suited for regions with lower average temperatures. The findings underscore the importance of considering both rainfall and temperature factors when selecting safflower genotypes for specific regions. In conclusion, the study emphasizes the impact of seasonal climate change on safflower productivity and highlights the need to develop new safflower varieties capable of adapting to predicted hotter and drier conditions due to climate change.

The inevitable depletion of fossil resources and the anthropogenic climate change arising from their excessive utilization make necessary the search for renewable feedstocks and developing eco-friendly technologies for producing greener energy, fuels and chemicals. Through the present mini-review, we intend to share with the research community our relevant contributions to advance the production of carbon-neutral propylene, 1,2-propanediol and biohydrogen through thermo-chemical conversion of biomass-derived glycerol, aided by diverse heterogeneous catalysts. The reported achievements, which have been recently recognized by the “ACI/NBB Glycerine Innovation Award”, are organized and discussed in four marked sections. Thus, after having highlighted the possible economic and environmental benefits of producing such value-added commodities from bioglycerol excess, we present different re-designing actions to improve the properties of transition metals-based (e.g. Pt, Pd, Ni, Cu or Mo) supported on γ-Al2O3 or SiO2 for boosting glycerol transformation via: i) steam reforming, ii) aqueous-phase reforming, iii) hydrogenolysis and iv) hydrodeoxygenation reactions. Then, the catalytic role of metallic, acid and/or redox sites in these reactions is discussed together with the identification of the main factors affecting their stability under H2O-rich conditions. The effect of reaction configurations and operating conditions in the conversion of glycerol to the target product are also assessed. The gained knowledge on re-modulating catalyst properties and optimizing reaction strategies, including mechanisms and process operability, is expected to provide a comprehensive guideline for continuously improving the efficiency of bioglycerol upgrading routes.

Previous reports indicate variable soybean quality parameters exported from different geographic regions. This review compares soybean and soybean co-products grown under diverse environmental conditions. While numerous studies have been conducted on whole soybean and soybean meal (SBM) composition by origin, similar analysis of soybean oil is lacking. This review has two objectives: 1) summarize soybean and SBM quality by origin using a meta-analysis approach, and 2) analyze collected crude degummed soybean oil samples that originate from the US, Brazil and Argentina for key quality attributes. Soybeans from Brazil have higher levels of protein (P < 0.05) than US soybeans, but US soybeans have lower heat damage (P < 0.05) and total damage (P < 0.05) than soybeans from Brazil. US and Brazil SBM have higher crude protein (CP) (P < 0.05) than SBM from Argentina. At equal CP content, US SBM had less fiber (P < 0.0001), more sucrose (P < 0.0001) and lysine (P < 0.0001) and better protein quality than South American SBMs. Methionine, threonine, and cysteine levels were similar in soybean protein from US and Argentina and higher than that in soybean protein from Brazil. Crude degummed soybean oil from Brazil had more (P < 0.05) free fatty acids, neutral oil loss, phosphorus, calcium and magnesium than crude degummed soybean oil from the US or Argentina. Our analysis suggests that environmental conditions under which soybeans are grown, stored, and handled can have a large impact on chemical composition and nutrient quality of soybean meal and soybean oil.

The conversion of triglycerides in edible oils into diacylglycerols (DAGs) is of great significance for obtaining products with health benefits. Camellia seed oil (C-oil), which is rich in oleic acid and linoleic acid, is an excellent raw material for the production of DAGs. In this study, the hydrolysis rate reached 87.14% under optimal hydrolysis conditions (reaction temperature of 60 °C, reaction time 24 h, 30% water content and 4% enzyme addition) with RMIM as catalyst, and camellia seed oil diacylglycerol (C-DAG) with a content of 62.49% was also given under optimal esterification conditions (vacuum system, 3% enzyme addition, 2% water addition, reaction temperature of 50 oC, and substrate molar ratio of free fatty acid to glycerol of 1:1). The high content of DAG was obtained by a coupled method, which eliminated the purification steps and reduced production costs. C-oil, and C-DAG have been characterized by means of GC, TG, DSC, and GC-IMS. Our results showed that the enzymatic coupling method did not affect the structural composition of the substances themselves, but did affect the crystallization and melting properties of the oils. Moreover, the taste of C-DAG was more delicate flavor than that of C-oil. Finally, the reaction mechanism has been analyzed by means of infrared spectroscopy, which showed that C-oil was mostly hydrolyzed to free fatty acids. C-DAG exhibited ester C-O stretching vibrations in the range 1280–1030 cm-1, indicating successful esterification reaction between camellia seed oil free fatty acids (C-FFAs) and glycerol under catalysis by the enzyme.

This study conducted a thorough investigation into the impact of two emulsification techniques, namely high-pressure homogenization (HPH) and microfluidization (MF), on the emulsification of krill oil. The comprehensive analysis encompassed various aspects, including particle size characterization, structural assessment, oxidative stability evaluation during storage, measurement of bioaccessibility, and in vitro simulated digestion analysis. Emulsions produced through MF exhibited several noteworthy advantages over those generated by HPH. Most prominently, MF-prepared emulsions featured smaller and more uniformly distributed particles, in stark contrast to the less uniform particles generated by HPH. Moreover, MF-based emulsions demonstrated significantly enhanced oxidative stability during storage, with astaxanthin degradation occurring at a substantially lower rate (38.11% for HPH compared to 89.44% for MF). When assessing emulsion behavior during in vitro simulated digestion, microfluidization formulations exhibited superior stability and markedly higher bioaccessibility in comparison to their HPH counterparts. Of particular significance was the remarkable increase in the release of free fatty acids observed during the intestinal phase of digestion in MF emulsions, indicating an improved lipid digestion process. This study firmly establishes microfluidization as the superior method for crafting emulsions of krill oil, especially within the context of the food industry. Microfluidization not only ensures the preservation of oil quality during storage but also significantly enhances emulsion stability and promotes improved digestibility. These findings hold substantial promise for the development of delivery systems for n-3 fatty acids, making them suitable for incorporation into a wide range of commercial food, beverage, and pharmaceutical products.

Biodiesel (fatty acid methyl esters [FAME]) is a renewable biomass-based diesel (BBD) fuel made from plant oils, animal fats and waste greases. Its production continues to increase globally, especially with more countries moving to increase the use of renewable fuels. One of the main disadvantages of biodiesel is its relatively poor oxidative stability. During longer periods of storage at fuel terminals or in vehicle tanks and fuel systems, biodiesel can react with oxygen in ambient air, leading to degradation that can adversely affect its viscosity and ignition quality. The shelf-life of biodiesel is an important property that can determine the conditions such as how long it can be stored at low temperatures. The objective of this work is to develop mathematical equations to estimating the shelf-life of biodiesel at T = 25 °C. This was done by measuring the induction period by Rancimat instrument (IP R) at different temperatures and extrapolating the results using two types of linear models. Model equations were developed from regression analysis performed on results for canola, palm and soybean oil-FAME (CaME, PME and SME), methyl oleate (MeC18:1) and methyl linoleate (MeC18:2). The best results from confirmation analysis were obtained for Model B type equations. This model type correlated ln(IP R) with inverse T (T −1) data and provided the most realistic estimates of the shelf-life (SL B) of the five FAME studied in this work.

The development of winter-tolerant safflower genotypes is crucial for the improvement of global safflower agriculture. The aim of the present study was to determine the cold tolerance abilities and some agricultural characteristics of advanced safflower genotypes. For this purpose, ten advanced safflower genotypes were used in four different locations. The experimental design was a randomized complete block design with three replications. Winter survival and agricultural characters were significantly affected by growing season, location and genotype. Winter survival varies between 86.43% and 93.91% among the genotypes, and it was promising for winter sowing. As the average of two years, the highest oil content (36.25%) was observed in genotype EC21 and it was followed by genotypes EC11 (35.51%) and EC20 (35.49%). As with the seed yield, the high winter survival of genotypes with high oil content is highly promising in terms of winter sowing. Safflower should be grown in winter with mild temperature regions for high seed yield and sustainable safflower production. Therefore, this study focused on winter-tolerant genotypes that are superior one in terms of seed yield and oil content.

The triacylglycerols (TAGs) containing saturated (Sat) -unsaturated (U) fatty acid moieties (Sat-U mixed acid TAGs) are widely present in most natural fats and employed in many industrial applications. The mixing behavior of different Sat-U mixed acid TAGs acts important roles in the physicochemical properties TAG-based materials. Among the three main mixing states of miscible, eutectic and molecular compound (MC) forming mixtures, fundamental research has been conducted on the MC crystals formed by different Sat-U mixed acid TAGs to understand the structures, phase behavior and crystallization properties. This article reviews recent studies on the complex thermodynamic, kinetic and structural factors that affect the formation of MC crystals in binary and ternary mixtures of Sat-U mixed acid TAGs (SatUSat, SatSatU, USatU and UUSat) through specific molecular interactions among the component TAGs. Furthermore, the application of the MC-forming mixtures containing cacao butter to new types of cocoa butter alternative is reviewed.

The presence of insoluble components greatly minimizes the potential application of pulse proteins in beverage emulsions. Therefore, pea protein concentrate was mildly fractionated by aqueous centrifugation at 4,000g for 1 min to recover a soluble fraction (71% protein yield), which was then used to develop 5% oil-in-water emulsions using a high-pressure homogenizer. Emulsion stability was tested by heat treatment (90°C, 30 min) in the presence of NaCl (0-1M) at pH 7.0 and 2.0. Stability increased upon adding salt at pH 7, while at pH 2, proteins and droplets aggregated. Heat treatment led to extensive aggregation at both pH values due to denaturation and aggregation of proteins at the oil droplet surface, which was further worsened by salt. To prevent thermal destabilization, the proteins were heat-treated at 75°C for 30 min for partial denaturation before emulsification under hot conditions. The heat-treated protein-stabilized emulsions at pH 7 had superior thermal stability at all salt concentrations without aggregation. However, a similar improvement in stability was not observed at pH 2. Pre-heating the soluble protein exposed the hydrophobic patches, leading to better adsorption on the droplet surface, which did not show additional aggregation upon further heating the emulsions at pH 7. The heat-treated protein-stabilized emulsions showed about a 44% drop in lipid digestibility compared to the original emulsions. The proposed approach could be a valuable addition to the utilization of pea proteins in developing beverage emulsions that could withstand the heat treatment used during food processing.

We investigated the development of water-in-oil (W/O) emulsions just using CW, evaluating the effect of the water to CW oleogel ratio (40:60, 50:50, 60:40) and, at each ratio, the effect of the CW concentrations (0.75% to 3%). The emulsions were developed by shearing (60 s at 25°C) using an ultra-turrax type homogenizer. The emulsions were immediately evaluated and after 20 days of storage (25°C) for microstructure, water droplet diameter, emulsion stability through DSC freeze/thaw cycles, rheological properties, and X-ray measurements. The results showed that, at all water to oleogel ratios studied the CW developed structured W/O emulsions where the surface-active components of the CW (i.e., triterpenic alcohols, aliphatic alcohols, and fatty acids) stabilized the oil-water interface, while the n-alkanes and long chain esters formed an oleogel in the oil phase. Although, independent of the storage time, all the CW emulsions showed a frequency independent rheological behavior, after applying a strain above the G’-G” cross point, the 40:60 and 50:50 emulsions with 1.5% to 3% CW concentration showed the better rheological behavior and were the most stables, even after two freeze-thaw cycles. In particular, the 40:60 and 50:50 emulsion with 1.5% CW had a recovery profile similar to commercial mayonnaise. In contrast, independent of the CW concentration, the 60:40 emulsions showed the lowest recovery profiles and higher instability to freeze-thaw cycles. These results indicated that the CW is a multi-functional material able to develop structured W/O emulsions useful for the formulation of trans-free, stable low-fat edible spreads.

Oleoresins are resin-like viscous materials obtained from plants, oilseed, or spices with functional properties. The extraction process determines their stability, composition, and physicochemical properties. Oleoresins were obtained from ground waxy burgundy whole grain sorghum with and without ball milling by using the following solvents: two types of novel ionic liquids (IL1: 1-n-Hexyl-3-methylimidazoliumchloride, IL2: 1-Ethyl-3-methylimidazoliumchloride), ethanol and dichloromethane. The effects of processing were evaluated for the extraction yield, protein, fat and total phenolic content, fatty acid composition, particle size and zeta potential, and FTIR spectra. The use of ILs and ball mill process significantly (P < 0.05) affected the extraction yield and physicochemical properties. The highest extraction yields increased (31.35% ± 0.58) when ball milling used with IL2 in comparison to the lowest (18.37% ± 0.77) obtained by traditional ethanol extraction. In a similar way, protein concentration and phenolic content were the highest (1.37% ± 0.05 and 0.57% ± 0.01, respectively) with ball milling extraction and IL1. The FTIR spectra indicated higher phospholipids (at 1200 cm-1) and protein-phospholipid bonding (at 1700 cm-1) by ILs, and ball milling as compared to traditional extraction. Overall, wet milling-assisted extraction by using ball mill and ILs can provide control for the composition of the oleoresins important for their functional properties with higher extraction efficiencies as compared to traditional techniques.

This study investigated an alternative approach to valorizing canola proteins by hydrolyzing them to generate amino acids (AAs). Pre-treatment of cold-pressed (CP) cake and desolventized-toasted (DT) meal with ethanol (99%, v/v) followed by protein separation was studied as process optimizations to maximize protein recovery with higher purity. The optimum ethanol pre-treatment conditions to achieve a meal containing less than 1% oil was reached at a meal-to-ethanol ratio of 1:4 (w:w) and 50°C for 30 min extraction. The protein recovery reached the maximum at pH 12 and a meal-to-solvent ratio of 1:10 (w:v), yielding 73% and 33% recovery from ethanol pre-treated CP and DT meals, respectively, in a single extraction. Untreated and ethanol pre-treated meals were hydrolyzed with 6 M HCl (protein-to-acid ratio of 5 mg:2 mL) for 24 h at 110°C. The ethanol pre-treatment improved AA recovery and released 373 mg AA/g dry CP meal biomass (dbm) compared to 279 mg AA/g untreated CP cake dbm. However, no improvement in AA recovery upon ethanol pre-treatment of DT meal. H2SO4 was examined as an alternative acid. More than 80% of the total AAs of CP proteins were released with 3 M H2SO4, while for DT meal proteins, a 5 M concentration was needed to achieve the same. Commercial canola meals can be utilized for generating free AAs; however, the meal processing history may affect the yield.

In order to develop the application of walnut kernel, the effect of steaming and roasting treatment on the physicochemical and functional properties of walnut kernel at 95 ºC for different time (15, 20 and 30 min) was investigated, and compared to those of untreated sample. Scanning electron microscopy suggested that heating treatment had a notable effect on the microstructure of walnut kernel, especially the steam heating. Both treatments significantly increased the enthalpy, vitro protein digestibility, viscosity, G′ and G″ (P < 0.05), the order from high to low was steaming > roasting > untreated. All samples contained the amounts of essential amino acids, the amino acid score (AAS) of samples by steaming was the highest compared to that of the untreated and roasting, and the only limiting amino acid of walnut kernel before or after heat treatment was lysine. In addition, the protein of walnut kernel after heating treatment with the extension of time contained more α-helix and random coil structures compared to the untreated sample, while β-sheet and β-turns structures decreased. Moreover, the thermal treatment could cause the changes of the water/oil holding capacity, foaming and emulsifying properties of walnut kernel flour. When there were differences between the results of steaming and roasting samples, it was concluded that the water played an important role in steaming. These results suggested that the thermal treatment as an effective approach could improve the physico-chemical, structural and functional properties of walnut kernel and be potentially applied in the food processing.

Mustard seeds have been used since ancient times contributing great economic value to global agriculture. Canada, one of the world’s top producers, grows three main mustard varieties, white /yellow, (Brassica hirta/ Sinapis alba), black (Brassica nigra) and Oriental (Brassica juncea). Besides their high protein and lipid content, mustard varieties are a rich source of phenolic compounds. This review will cover mustard seed components including lipids, glucosinolates, and sinapates. The latter are the main phenolic compounds in mustard and include sinapine, sinapic acid and its conversion to canolol. The important bioactivities associated with mustard phenolics, has led to efforts to improve the methods for their extraction. The use of green technology is crucial for producing these phenolics while minimizing any detrimental effects to the environment. The important antioxidant and anticancer activities of these phenolics will also be reviewed.

In this study, It was aimed to determine the effects of different production and preservation methods on the shelf life and quality of the Gemlik variety natural black table olives produced with low salt (2%). For this purpose the olives processed with traditional Turkis turning black olive using starter culture The MAP (Modified athmosphere packaging), vacuum and gamma irradiation method (1, 3 and 5 kGy) was applied for the first time in the preservation of table olives. The reducing effect of 5 kGy dose on total phenolic substance and DPPH antioxidant activity was found to be higher than other doses. During storage, pH (4.30-4.83) and titratable acidity (0.68-1.02%) values of black table olives changed in normal course. At the and of the fermentation and storage, total phenolic substance and DPPH antioxidant activity decreased and were found statistically significant (p<0.01). During the storage period, the total amount of phenolic matter in olives in normal production (without starter culture) decreased from 232 to 144 mgCAE/100g and in starter culture added table olives from 200 to 138 mgCAE/100g. As a result of the study, it was ensured that table black olives produced with less salt (2%) could be stored on the shelves for at least 6 months without using any preservatives. In addition, radiation effect on quality was relatively similar to other applications.

Three oleogeletors molecules (Triacontane (TC), Stearic acid (SA), and Behenyl Lignocerate (BL)) were studied individually, in pairs, or all together to make an oleogel using triolein as the oil. WAXS, SAXS and USAXS were used to elucidate the solid structures from angstroms to a few micrometers. A two-dimensional mapping of atomic positions for each molecule was carried out to understand the crystalline multilayer structures formed. We assumed that the molecules were rigidly extended and that they underwent no significant (hindered) rotations so that the free energy is determined by the Lennard-Jones interactions of closely-packed multilayers. TC molecules were predicted to form a tilt angle of θt ≈ 33°, yielding a SAXS line at q≈ 0.194 Å-1, in acceptable agreement with the measured q=0.181 Å-1.For SA crystals θt ≈ 33° (predicted) yielding a SAXS line at q=0.150 Å-1 compared to q=0.159 Å -1 (observed). No mixed crystals were observed for any pair of molecules or when all three were used. USAXS data showed that SA forms large nanocrystals compared to TC and BL. All three combinations of molecular pairs showed basic scatterers smaller or similar to those of individual molecules. The theory presented here, together with the experimental results, showed why no mixed crystals are formed from two or all three molecules. Data from the USAXS region suggested that, when using all three molecules, a more compact fractal structure was obtained, compared with those if one or two of the molecules were used.