The Chinese hamster ovary (CHO) cell is a fibroblast-like cell that produces proteins with post-translational modifications similar to human glycosylation. It is widely used in the production of recombinant therapeutic proteins and monoclonal antibodies. Culturing CHO cells typically requires the addition of a certain proportion of fetal bovine serum (FBS) to maintain cell proliferation and passaging. However, serum is characterized by its complex composition, batch-to-batch variability, high cost, and potential risk of exogenous contaminants such as mycoplasma and viruses, which impact the purity and safety of the synthesized proteins. Therefore, search for serum alternatives and development of serum-free media for CHO-based protein biomanufacturing are of great significance. This review systematically summarizes the application advantages of CHO cells and strategies for high-density expression. It highlights the developmental trends of serum substitutes from human platelet lysates to animal-free extracts and microbial-derived substances and elucidates the mechanisms by which these substitutes enhance CHO cell culture performance and recombinant protein production, aiming to provide theoretical guidance for exploring novel serum alternatives and developing serum-free media for CHO cells.

DNA ligases catalyze bond formation in the backbone of nucleic acids via the formation of a phosphodiester bond between adjacent 5’ phosphates and 3’ hydroxyl groups on one strand of the duplex. While DNA ligases preferentially ligate single breaks in double stranded DNA (dsDNA), they are capable of ligating a multitude of other nucleic acids substrates like blunt-ended dsDNA, TA overhangs, short overhangs and various DNA-RNA hybrids. Here we report a novel DNA ligase from Chronobacter phage CR 9 (AZ R2D Ligase) with an unexpected DNA-to-RNA ligation activity. The R2D ligase shows excellent efficiency when ligating DNA to either end of RNA molecules using a DNA template. Furthermore, we show that DNA can be ligated simultaneously to both the 5’ and 3’ ends of microRNA-like molecules in a single reaction mixture. Abortive adenylated side product formation is suppressed at lower ATP concentrations and the ligase reaction reaches near completion when ligating RNA to DNA or DNA to RNA. The ligation of a DNA strand to the 5’-PO4 end of RNA is unique among the commercially available ligases and may facilitate novel workflows in microRNA analysis, RNA sequencing and in the preparation of chimeric guide DNA-RNA for gene editing applications.

Schizochytrium sp. is a heterotrophic microorganism capable of accumulating polyunsaturated fatty acids, and has achieved industrial production of docosahexaenoic acid (DHA). It also has the potential for eicosapentaenoic acid (EPA) production. In this study, it was found that the cell growth, lipid synthesis and fatty acid composition of Schizochytrium sp. were significantly affected by the level of cobalamin in the medium, especially with regards to the content of EPA in the fatty acids. The content of EPA in the fatty acids increased 17.91 times, reaching 12.0%, but cell growth and lipid synthesis were significantly inhibited under cobalamin deficiency. The response mechanism for this phenomenon was revealed through combined lipidomic and transcriptomic analysis. Although cell growth was inhibited under cobalamin deficiency, the genes encoding key enzymes in central carbon metabolism were still up-regulated to provide precursors (Acetyl-CoA) and reducing power (NADPH) for the synthesis and accumulation of fatty acids. Moreover, the main lipid subclasses observed during cobalamin deficiency were glycerolipids (including glycerophospholipids), with EPA primarily distributed in them. The genes involved in the biosynthesis of these lipid subclasses were significantly up-regulated, such as the key enzymes in the Kennedy pathway for the synthesis of triglycerides. Thus, this study provided insights into the specific response of Schizochytrium sp. to cobalamin deficiency and identified a subset of new genes that can be engineered for modification.

Laccases have shown to be efficient biocatalysts for the removal of recalcitrant pollutants from wastewater. Thus, they catalyse the oxidation of a wide variety of organic compounds by reducing molecular oxygen to water. However, the use of free laccases holds several drawbacks such as poor reusability, high cost, low stability and sensibility to different denaturing agents that may occur in wastewater. Such drawbacks can be circumvented by immobilising laccase enzymes in/on solid carriers. Hence, during the last decades different approaches considering various techniques and solid carriers to immobilise laccase enzymes have been developed and tested for the removal of pollutants from wastewater. To scale up wastewater treatment bioprocesses, the immobilised laccases are placed in different reactor configurations.

This study evaluated the performance of biofilm reactors inoculated with azo dye degrading Shewanella for the decolorization of Reactive Black 5 (RB5), using three different carrier materials, namely almond shell biochar, moving bed biofilm reactor (MBBR), and polypropylene carrier (PPC). The reactors were fed with low-nutrient artificial wastewater containing RB5 for a long term, and all three carriers showed good RB5 decolorization performance, with varying efficiencies. LC-MS analysis revealed significant differences in the degradation pathways of RB5 among the carriers, indicating the role of carrier materials and microbial communities. The MBBR carrier exhibited good stability due to its rough surface and microbial aggregates. Sequencing results revealed significant differences in the microbial community structure among the carriers. Shewanella was the dominant functional bacteria in the MBBR and PPC carriers, while highly efficient degrading microbial communities were observed on the biochar carrier. Overall, the physicochemical properties of the carrier materials had a significant impact on the microbial community in the reactor, which affected the degradation efficiency of RB5. These findings provide valuable insights into the optimization of biofilm reactors for dye-containing wastewater treatment.

The combination of single-cell RNA sequencing and microdissection techniques that preserves positional information has become a major tool for spatial transcriptome analyses. However, high costs and time requirements, especially for experiments at the single cell scale, make it challenging for this approach to meet the demand for increased throughput. Therefore, we proposed combinational DNA barcode (CDB)-seq as a medium-throughput, multiplexed approach combining Smart-3SEQ and CDB magnetic microbeads for transcriptome analyses of microdissected tissue samples. We conducted a comprehensive comparison of conditions for CDB microbead preparation and related factors and then applied CDB-seq to RNA extracts, fresh frozen (FF) and formalin-fixed paraffin-embedded (FFPE) mouse brain tissue samples. CDB-seq transcriptomic profiles of tens of microdissected samples could be obtained in a simple, cost-effective way, providing a promising method for future spatial transcriptomics.

The isopentenol utilization pathway (IUP) is potential in terpenoids synthesis. This study aimed to construct IUP-employed E. coli chassis for stably synthesizing terpenoids. As to effectiveness, promotor engineering strategy was employed to regulate IUP expression level, while ribosome-binding site (RBS) library of the key enzyme was constructed for screening the optimal RBS, followed by optimization of concentration of inducer and substrates, the titer of reporting production, lycopene, from 0.087 to 8.67 mg/OD600. As about stability, the IUP expression cassette was integrated into the genome through transposition tool based on CRISPR-associated transposases. Results showed that the strain with 13 copies produced 1.78-fold lycopene titer that of the controlled strain with IUP-harbored plasmid, and it exhibited stable expression after ten successions while the plasmid loss was observed in the controlled strain in the 3rd succession. This strategy provides valuable information for rapid construction of highly effective and stable chassis employing IUP for terpenoids production.

Polymer surfactants are key components of cell culture media as they prevent mechanical damage during fermentation in stirred bioreactors. Among cell-protecting surfactants, Pluronics are widely utilized in biomanufacturing to ensure high cell viability and productivity. Mono-dispersity of monomer sequence and length is critical for the effectiveness of Pluronics - since minor deviations can damage the cells - but is challenging to achieve due to the stochastic nature of polymerization. Responding to this challenge, this study introduces Peptonics, a novel family of peptide and peptoid surfactants whose monomer composition and sequence are de-signed to achieve high cell viability and productivity at a fraction of chain length and cost of Pluronics. A designed ensemble of Peptonics was initially characterized via light scattering and tensiometry to select sequences whose phase behavior and tensioactivity align with those of Pluronics. Selected sequences were evaluated as cell-protecting surfactants using Chinese hamster ovary (CHO) cells expressing therapeutic monoclonal antibodies (mAb). Peptonics IH-T1010, ih-T1010, and ih-T1020 afforded high cell density (up to 3·107 cells·mL-1) and viability (up to 95% within 10 days of culture), while reducing the accumulation of ammonia (a toxic metabolite) by ~10% compared to Pluronic F-68. Improved cell viability afforded high mAb titer (up to 5.5 mg·mL-1) and extended the production window beyond 14 days; notably, Peptonic IH-T1020 decreased mAb fragmentation and aggregation ~5%, and lowered the titer of host cell proteins by 16% compared to Pluronic F-68. These features can improve significantly purification of mAbs, thus increasing their availability at lower cost to patients.

Peptide drugs are developed from endogenous or synthetic peptides with specific biological activities. They have advantages of strong target specificity, high efficacy and low toxicity, thus showing great promise in the treatment of many diseases such as cancer, infections and diabetes. Although an increasing number of peptide drugs have entered market in recent years, the preparation of peptide drug substances is yet a bottleneck problem for their industrial production. Comparing to the chemical synthesis method, peptide biosynthesis has advantages of simple synthesis, low cost, and low contamination. Therefore, the biosynthesis technology of peptide drugs has been widely used for manufacturing. Herein, we reviewed the development of peptide drugs and recent advances in peptide biosynthesis technology, in order to shed a light to the prospect of industrial production of peptide drugs based on biosynthesis technology.

Chlamydomonas reinhardtii has been successfully engineered to produce compounds of interest following transgene integration and heterologous protein expression. The advantages of this model include the availability of validated tools for bioengineering, its photosynthetic ability and its potential use as biofuel. Despite this, breakthroughs have been hindered by its ability to silence transgene expression through epigenetic changes. Histone deacetylases (HDAC) are main players in gene expression. We hypothesized that transgene silencing can be reverted with chemical treatments using HDAC inhibitors. To analyze this, we transformed C. reinhardtii, integrating into its genome the mVenus reporter gene under the HSP70-rbcs2 promoter. From 384 transformed clones, 88 (22.9 %) displayed mVenus positive (mVenus+) cells upon flow-cytometry analysis. Five clones with different fluorescence intensities were selected. The number of integrated copies was measured by qPCR. Transgene expression levels were followed over the growth cycle and upon SAHA treatment, using a microplate reader, flow cytometry, RT-qPCR, and western blot analysis. First, we observed that expression varies with the cell cycle, reaching a maximum level just before the stationary phase in all clones. Second, we uncovered that supplementation with HDAC inhibitors of the hydroxamate family, such as vorinostat (suberoylanilide-hydroxamic-acid, SAHA) at the initiation of culture increases the frequency (% of mVenus+ cells) and the level of transgene expression per cell over the whole growth cycle, through histone deacetylase inhibition. Thus, we propose a new tool to successfully trigger the expression of heterologous proteins in the green algae C. reinhardtii, overcoming its main handicap as an expression platform.

Adeno-associated viruses (AAVs) have acquired a central role in modern medicine as delivery agents for gene therapies targeting rare diseases. While new AAVs with improved tissue targeting, potency, and safety are being introduced, their biomanufacturing technology is lagging. The AAV purification pipeline, in particular, hinges on protein ligands for the affinity-based capture step: while featuring excellent AAV binding capacity and selectivity, these ligands require strong acid (pH <3) elution conditions, which can compromise the product’s activity and stability; additionally, their high cost and limited lifetime has a significant impact on the price tag of AAV-based therapies. Seeking to introduce a more robust and affordable – yet equally effective – affinity technology, this study introduces a cohort of peptide ligands that (i) mimic the biorecognition activity of the AAV receptor (AAVR) and anti-AAV antibody A20, while (ii) enabling product elution under near-physiological conditions (pH 6.0) and (iii) granting extended reusability by withstanding multiple regenerations. A20-mimetic CYIHFSGYTNYNPSLKSC and AAVR-mimetic CVIDGSQSTDDDKIC demonstrated excellent capture of serotypes belonging to distinct clones/clades – AAV1, AAV2, AAV5, AAV6, AAV8, and AAV9 – corroborating the in silico models documenting their ability to target regions of the viral capsid that are conserved across all serotypes. CVIDGSQSTDDDKIC-Toyopearl resin features binding capacity (~1014 vp per mL) and product yields (~60-80%) on par with commercial adsorbents, and purified AAV2 from HEK293 and Sf9 cell lysates affording high recovery (up to 78%) and reduction of host cell proteins (up to 700-fold), and high transduction activity (up to 65%) of the purified vectors.

Statins as a lipid-lowering drug can selectively inhibit 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) reductase and decrease cholesterol synthesis effectively. With the improvement of nutritional conditions, the demand for statins is increasing in global market. Due to the rapid development of modern biotechnologies, the biosynthesis of stains by microbial cell factory appears great advantages. It has the advantages of simple operation and easy separation of products. This review summarized the strategies on statins production via microbial cell factory, including both traditional fermentation culture and modern synthetic biology manufacture. Firstly, the complex fermentation parameters and process control technology on submerged fermentation (SmF) and solid-state fermentation (SSF) were introduced in detail. Especially, the possibility of recoverable agricultural wastes/(Biomass) as fermentation substrate on solid-state fermentation to produce statins was emphasized. Besides, metabolic engineering strategies to construct robust engineering strains and strains evolution were also discussed. The review highlights the potential and challenge of microbial cell factory to yield the statins. Thus, it will facilitate the production of statins in more green production mode.

Drug-metabolizing enzymes play an important role in the metabolism of drugs in vivo. Their activity is an important factor affecting the rate of drug metabolism, which directly determines the intensity and persistence of drug action. Patients taking medication can be divided into different metabolic types through detection of CYP2C19 drug-metabolizing enzyme gene polymorphisms, which can then be used for medication guidance for clopidogrel. Here, we describe a detection method based on real-time polymerase chain reaction. This method uses multicolor melting curve analysis to accurately identify different mutation sites and genotypes of CYP2C19 * 2, CYP2C19 * 3, and CYP2C19 * 17. The detection limit of plasmid samples was 1 copies/µl; that of genomic samples was 0.1 ng/µl. The system can detect nine types of CYP2C19 * 2/3/17 at three sites in one tube, quickly achieving detection within 1 h. Combined with the sample release agent, sample extraction was completed in 5 s, achieving rapid diagnosis without extraction for timely diagnosis and treatment. Furthermore, the system is not limited to blood samples and can also be applied to oropharyngeal and saliva samples, increasing sampling diversity and convenience. When using clinical blood samples (n=93), the detection system we established was able to quickly and accurately identify different genotypes, and the accuracy and effectiveness of the detection were confirmed by Sanger sequencing.

Background Breast cancer is the most common malignant tumor disease and the leading cause of female mortality. The evolution of nanomaterials science opens the opportunity to improve traditional cancer therapies, enhancing therapy efficiency and reducing side effects. Methods and major results Herein, protein cages conceived as enzymatic nanoreactors were designed and produced by using virus-like nanoparticles (VLPs) from Brome Mosaic Virus (BMV) and containing the catalytic activity of glucose oxidase enzyme (GOx). The GOx enzyme was encapsulated into the BMV capsid (VLP-GOx), and the resulting enzymatic nanoreactors were coated with human serum albumin (VLP-GOx@HSA) for breast tumor cell targeting. The effect of the synthesized GOx nanoreactors on breast tumor cell lines was studied in vitro. Both nanoreactor preparations VLP-GOx and VLP-GOx@HSA showed to be highly cytotoxic for breast tumor cell cultures. Cytotoxicity for human embryonic kidney cells was also found. The monitoring of nanoreactors treatement on triple negative breast cancer cells showed an evident production of oxygen by the catalase antioxidant enzyme induced by the high production of hydrogen peroxide from GOx activity. Conclusions and implications The nanoreactors containing GOx activity are fully suitable for cytotoxicity generation in tumor cells. The HSA functionalization of the VLP-GOx nanoreactors could result in a prevailing strategy to improve selective cancer targeting. The GOx containing enzymatic nanoreactors seems to be an interesting alternative to improve the current cancer therapy. In vivo studies are on going to reinforce the effectiveness of this treatment strategy.

Liposomal drug products are playing an increasing role in the field of drug delivery. With this increased demand comes the need to increase the capabilities and capacity of manufacturing options. Continuous manufacturing techniques present a significant opportunity to address these needs for liposomal manufacturing processes. Liposomal formulations have unique considerations that impact translation from batch to continuous process designs. This article examines aspects of converting to a continuous design that were previously viewed as inconsequential in a batch process. The batch process involves the removal of ethanol through tangential flow filtration (TFF). Ethanol was found to reduce the permeability of the hollow fibers used for TFF. This effect was determined to have minimal impact on the overall batch process design but considerable influence on the design of continuous TFF such as inline diafiltration (ILDF). Using a pilot scale setup, ethanol was found to decrease permeability in an inverse manner to ethanol concentration. Further assessment found that dilution of the ethanol levels prior to diafiltration can significantly reduce the amount of ILDF stages needed and that a continuous design requires less buffer to the commensurate batch design.

Microtiter plates are suitable for screening and process development of most microorganisms. They are currently the container of choice for high-throughput and small-scale microbial culture, but require optimization for specific work. This research presents a novel type of microtiter plate was developed using computational fluid dynamics (CFD) technology. The new plate provides high oxygen supply and optimal mixing effects for the fermentation culture of docosahexaenoic acid (DHA) producing strains, surpassing the conventional method of strains screening with shake flasks, which is insufficient. the shape of the microtiter plate was modified, and baffles were introduced to improve mass transfer and oxygen supply effects in the vibrating bioreactor. CFD technology was used to model the new plate’s characteristics, establishing the superiority of hexagonal microtiter plates with six baffles. Parameters in the incubation process, such as vibration frequency and liquid load, were optimized, and the final result achieved a KLa of 0.61s-1 and a volume power input of 2364 w/m3, which was 4-5 times better than the original 96-well plate. The culture results optimized by the model were also verified. Therefore, this new microtiter plate provides a powerful tool for future high-throughput screening of strains.

In the last two decades, there have been significant advancements in the development of more physiologically relevant organ-on-a-chip (OOC) systems that can mimic the tissue microenvironment. Despite the advantages of these microphysiological systems, such as portability, the ability to mimic physiological flow conditions, and the reduction of reagents required for preparation and detection, they lack real-time detection of analytes with high accuracy. To address this, biosensor technologies have been integrated with OOC systems to enable simultaneous analysis of different analytes in a single device. However, integrating biosensors with OOC systems is challenging due to the competing demands for low-cost, simple fabrication processes, and speed. This study presents the fabrication of a glucose sensing device integrated with a liver-on-a-chip (LOC) platform. The conductive PLA-based three-electrode system was printed using FDM 3D printing technology to simplify the fabrication process. The sensitivity of the glucose biosensing device was enhanced by adding multi-walled carbon nanotubes on the electrodes. The biosensing integration study using a perfusion-based LOC showed the stability, biocompatibility, and sensitivity of the glucose sensing devices. Furthermore, drug toxicity studies on the LOC platform demonstrated the device’s ability to detect a broad range of glucose concentrations and its enhanced sensitivity.

The occurrence of random mutations can increase the diversity of the genome and promote the evolutionary process of organisms. High efficiency mutagenesis techniques significantly accelerate the evolutionary process. In this work, we describe a targeted in vivo mutagenesis system to significantly increase mutation frequency and generate mutations across all four nucleotides. We constructed different DNA-modifying enzyme-PmCDA1-T7 RNA polymerase fusion proteins, achieved targeted mutagenesis by flanking the target gene with T7 promoters, and tuned the mutation spectra by introducing different DNA-modifying enzymes. With the mutagenesis fusion proteins, the mutation frequency of the target gene could reach 5.13x10-3, and the proportion of non-C→T mutations is 10~11-fold higher than the cytidine-based evolutionary tools. We also demonstrated that our mutagenesis tools could be used to evolve the essential enzyme in the β-carotene biosynthesis process and generate mutations with different types.